GFP version of the Closed FluorCam can serves for a number of applications using green fluorescent proteins in molecular and cellular biology. The basic system of the Closed FluorCam (CCD camera, four fixed LED panels) is supplemented by a fully motorized and software-controlled filter wheel and appropriate filter sets for the detection and imaging of green fluorescent protein (GFP), red-shifted GFP (EGFP), or other variants of fluorescent proteins.
The device configuration enables user-friendly and quick transition between the GFP and chlorophyll fluorescence detection and imaging. The system is very compact and allows dark adaptation of investigated samples. The price includes the FluorCam control unit with four light-upgraded LED panels, high-resolution camera, control PC with pre-installed FluorCam7 software, and filter wheel with filters for detection of GFP and Chl fluorescence.
- Combined imaging of GFP and chlorophyll fluorescence.
- Included high-resolution CCD camera: full resolution 1392 x 1040 (15 fps), 30 fps at resolution 640 x 480; integration times from microseconds to seconds; binning options. The camera is specifically intended for detection of weak signals demanding long integration times; the setup retains most of the functionalities for chlorophyll fluorescence kinetics measurement.

- Four light-upgraded LED panels (4 panels 470 nm OR 2 panels 447 nm + 2 panels 470 nm OR 2 panels 627 nm and 2 panels 470 nm) .
- Additional UV, green, yellow, amber, orange or infrared light source (optional).
- 8 position filter wheel - motorized and software-controlled (included).
- Selectable shelf system for different plant sizes (included).
- Dark room for adaptation (included).
- Coming with a high-end computer and user-friendly software (included).
- Steady-state GFP fluorescence
- Gene transfer and biosensoring.
- Screening for genotype resistance.
- Plant-microbe interactions research.
- Bacterial-protozoan interactions research.
- Agriculture and horticulture.
GFP Expression in Corn Kernels (GFPCam Captured)
- Quenching.
- Kautsky induction.
- QA reoxidation (needs optional accessories).
- Fast fluorescence induction (OJIP)(needs optional accessories).

Filter Wheel
- Leaves, stems, seeds, roots, whole small plants.
- Calluses, seedlings on petri plates.
- Fruits and vegetables.
- Cyanobacteria, green algae, bacteria.
- Small animals.
- Sample size up to 13 cm x 13 cm.
Proteins of the GFP family demonstrate a great spectral diversity and they often have different excitation and emission spectra. Therefore it is important to use the most appropriate filter sets so as to obtain maximum sensitivity for FP viewing.
- Red-shifted variant ( EGFP)
The excitation peak is centered at about 488 nm and the emission peak is at 507 - 509 nm.
Suggested filters: short-pass 480 nm for excitation and 532/28 or 530/25 for emission. - Original (wild type) GFP variant (wtGPF)
The major excitation peak is centered at about 395 - 397 nm and the emission peak is at 504 nm.
Suggested filters: short-pass 420 nm for excitation and 532/28 or 530/25 for emission. - Blue-emitting variant (BFP)
The excitation peak at about 384 nm and the emission peak near 448 nm.
Suggested filters: short-pass 400 nm for excitation and 469/35 for emission. -
GFPCam Inside View: Camera + LED Panels
- Automated experimental protocols via a Windows Wizard.
- Multiple (automatically repeated) experiments.
- Automated labeling of individual plants, or samples, within the field of view.
- Kinetic analysis of data from all samples within the field of view.
- Numerous image manipulation tools.
- Imaging masks for 384-well plate, 96-well plate, Petri dish, etc.
- Barcode reader support.
- Export to Excel.
- Windows 2000, XP, Vista compatible*.
-
Corn Kernels Captured by the Closed GFPCam:
- GFP Variant in the Upper Lines
- Control Kernels in the Bottom Lines
Pricing
- Orders and Payments
- Closed GFPCam FC 800-C/1010GFP 23.500,- €
- Additional Infra-Red Light Panel 1.990,- €
- Additional Ultraviolet Light Panel 2.990,- €
- Additional Cyan/Blue/Green/Yellow Light Panel 2.490,- €
- QA-Reoxidation Module 11.000,- €
- Fast Fluorescence Induction (OJIP) Module Inquire for price,- €
- Software Module for Barcode Reader 910,- €
Optional Features and Accessories
QA-Reoxidation Module
High-end option allowing determination of QA-reoxidation kinetics. QA-reoxidation is recorded in a pump-and-probe manner, i.e. using repetitive flashes and recording with variable delay after each flash.
Fast Fluorescence Induction (OJIP) Module
Special electronic module for tracking fast fluorescence induction - OJIP. The processes are recorded in multiple light exposures, each with a variable delay after the light is switched on.
Additional LED Light Panels
Additional LED light panel is mounted at the top part of the FluorCam System. It is located under the camera; the objective of the camera is inserted in the central opening of this panel. The panel widens the possibility of employing more excitation colors for special applications. Available panel versions: ultraviolet, blue, cyan, green, yellow, orange, or infra-red.
Ultraviolet Panel - Recommended use: (1) multicolor fluorescence - UV excited blue F440, green F520, red F680, and infra-red F740 (must be accompanied with the filter wheel and high-resolution CCD); (2) excitation source for wtGFP, DAPI (filter wheel and high-resolution CCD required).
Cyan Panel: Recommended use: (1) studies on stomata function; (2) excitation source for EGFP (must be accompanied with the filter wheel and high-resolution CCD).
Green Panel: Recommended use: excitation source for YFP (must be accompanied with the filter wheel and high-resolution CCD).
Infra-Red Panel: Recommended use: determination of Fo' and PAR absorbance (use of filter wheel required).
Software Module for Barcode Reader
Program module for a fully automatic bar code search.
Download
FluorCam 6
OS: Win2000/XP
Language: English
Size: 6.5MB
FluorCam 7
OS: Win XP/Vista/Seven
Language: English
Size: 6.5MB
usb driver for FluorCam
OS: Win2000/XP
Language: English
Size: 6kB
usb driver for FluorCam
OS: Win Vista/Seven
Language: English
Size: 6kB
Documents
FluorCam Handy Brochure
Type: PDF
Language: English
Size: 214kB
FluorCam Leaf-Clip Brochure
Type: PDF
Language: English
Size: 169kB
Micro-FluorCam Brochure
Type: PDF
Language: English
Size: 212kB
Handy GFPCam Brochure
Type: PDF
Language: English
Size: 173kB
FluorCam Manual
Type: PDF
Language: English
Size: 11MB
Driver Installation
Type: PDF
Language: English
Size: 340kB
Other FluorCams
Open FluorCam FC 800-O is a highly modular instrument with flexible geometry. The LED panels and the light source generating saturating flashes can be arranged at various angles and distances from the sample. Also, the position of the camera relative to the sample is adjustable.
Closed FC 800-C
Closed FluorCam FC 800-C represents a highly innovative, world-wide used system of multispectral kinetic fluorescence imaging. It consists of a CCD camera and four fixed LED panels. The LED panels provide uniform irradiance over samples up to 13 x 13 cm – suitable for small plants, detached leaves, algal dilutions, etc. The system allows dark adaptation.
Closed GFPCam FC 800-C/1010GFP
Closed GFPCam FC 800-C/1010GFP serves for various applications using green fluorescent proteins in molecular and cellular biology. The device is equipped with a motorized, software-controlled filter wheel, which provides quick and simple transition between the GFP and chlorophyl fluorescence detection and imaging.
Handy FC 1000-H
Handy FluorCam FC 1000-H is a portable system designed for kinetically resolved fluorescence imaging of leaves and small plants both in a field and laboratory. The whole instrument can be carried in a convenient bag over the shoulder and can run on batteries.
Handy GFPCam FC 1000-H/GFP
Handy GFPCam FC 1000-H/GFP is a modified version of the popular Handy FluorCam. Its unique construction allows both GFP imaging and chlorophyll fluorescence imaging. It can be favorably used for lab and field experiments.
Handy - Leaf Chamber FC 1000-LC
Leaf Chamber Fluorcam FC 1000-LC is a unique system that allows you to conduct chlorophyll fluorescence imaging on a leaf maintained in a leaf chamber, while measuring leaf gas exchange at the same time. The Fluorcam unit can be attached to leaf chambers provided by most manufacturers of leaf gas exchange equipment.
Micro-FluorCam FC 2000
Micro-FluorCam FC 2000 extends the complete capacity of kinetic Chl-fluorescence imaging to the realm of individual cells and sub-cellular structures. It allows investigation of all conventional fluorescence parameters in individual chloroplasts or even grana-stroma thylakoid segments.